BİLDİRİ LİSTESİ

1. Three-dimensional finite element analysis for RedOx cycling of Ni-based solid oxide fuel cell anode, 6th International Hydrogen Technologies Congress (IHTEC-2022), Canakkale, Turkey.
2. Effects of increasing the electrolyte surface area on the electrochemical performance, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
3. Effect of Anode Functional Layer Material on the Performance of Anode Supported Micro-tubular SOFCs, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
4. Effects of adding graphene oxide to glass ceramic for solid oxide fuel cells, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
5. Development of LPG powered micro-tubular solid oxide fuel cell system for unmanned aerial vehicles, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
6. Investigation of contact problem in planar solid oxide fuel cells, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
7. Development of a high performance PEM fuel cell stack with open-cathode titanium bipolar plate for unmanned aerial vehicles, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
8. Development of ceramic-fiber reinforced sealants for solid oxide fuel cells, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
9. Fabrication of micro-tubular solid oxide fuel cells by tape casting method, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
   
10. Effects of increasing the electrolyte surface area on the electrochemical performance, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
    
11. Effect of catalyst microstructures on steam methanol reforming process, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
    
12. Fuel cell systems for submarines, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
    
13. Modeling of sheet hydroforming of metallic interconnectors for solid oxide fuel cells, 5th International Hydrogen Technologies Congress (IHTEC-2021), Nigde, Turkey.
    
14. Effect of Electrolyte Coating Parameters and Different Sintering Temperatures on Performance of Anode Supported Planar Solid Oxide Fuel Cells, 4th International Hydrogen Technologies Congress (IHTEC-2019), Edirne, Turkey.
    
15. Effect of surface roughness on sealing performance of glass ceramic in Solid Oxide Fuel Cells, 4th International Hydrogen Technologies Congress (IHTEC-2019), Edirne, Turkey.
    
16. Development of a solid oxide fuel cell stack with high energy density, 1st International Conference on Environment, Technology and Management (ICETEM), Nigde, Turkey.
17. Hydrojen and fuel cell R&D studies at DrV-Clean Energy Research Center, 1st International Conference on Environment, Technology and Management (ICETEM) (2019), Nigde, Turkey.
    
18. Influence of extrusion slurry composition on the properties of NiO-YSZ anode supported micro-tubes, International Conference on Materials Science and Nanotechnology For Next Generation (MSNG-2019), Nigde, Turkey.
    
19. The Effect of Three Phase Boundaries (TPBs) Formed by GDC Interlayer on the Performance of Anode Supported Solid Oxide Fuel Cell,  4th International Symposium on Materials for Energy Storage and Conversion (mESC-IS 2019), Mugla, Turkey.
    
20. Three Dimensional Stress Analysis of Anode Supported SOFC Synthetic Micro Structure, 4th International Symposium on Materials for Energy Storage and Conversion (mESC-IS 2019), Mugla, Turkey.
    
21. Effects of thermal cycling on joint strength of glass-ceramic sealing performance for solid oxide fuel cells, 4th International Hydrogen Technologies Congress (IHTEC-2019), Edirne, Turkey.
    
22. Effect of Electrolyte Coating Parameters and Different Sintering Temperatures on Performance of Anode Supported Planar Solid Oxide Fuel Cells, 4th International Hydrogen Technologies Congress (IHTEC-2019), Edirne, Turkey.
    
23. Development of A Solid Oxide Fuel Cell Stack with High Energy Density, 1st International Conference on Environment, Technology and Management (ICETEM), Nigde, Turkey.
    
24. Influence of anode exhaust gas flow direction on the performance of a fuel ejector for solid oxide fuel cells, International Congress on Engineering and Life Science (ICELIS 2018), Kastamonu, Turkey.
    
25. Effects of ejector outlet and exhaust inlet angles on a fuel ejector performance for solid oxide fuel cells, International Congress on Engineering and Life Science (ICELIS 2018), Kastamonu, Turkey.
    
26. Determination of ejector performance for 4 kW SOFC system through geometrical approach, 7^th International 100% Renewable Energy Conference (IRENEC 2017), Istanbul, Turkey.
    
27. Ekstrüzyon çamuru ve sinterleme sıcaklığının mikro-tüp katı oksit yakıt pili mikro yapısına etkisi, 2nd International Defense Industry Symposium (2017), Kirikkale, Turkey.
    
28. Numerical analysis of pressure drop due to channel bend effect in serpentine flow field pattern, 2nd International Defense Industry Symposium (2017), Kirikkale, Turkey.
    
29. Three Dimensional Synthetic Microstructure Generatıon For Solid Oxide Fuel Cell Electrode , International Conference On Mechanics And Materials In Design (2015) Ponta Delgada, Azores.
30. Development of anodes for direct oxidation of methane fuel in solid oxide fuel cells, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
31. Investigation of mechanical properties of Crofer 22 APU sheets for SOFC applications, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
32. Effects of fabrication parameters on the performance of solid oxide electrolyzer cell, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
33. Recent advances on micro-level modeling of solid oxide fuel cells, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
34. Investigation of temperature distribution and performance on single SOFC stack with/without machined gas channels, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
35. Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
36. Investigation of micro-tube solid oxide fuel cell fabrication parameters by produced phase inversion method, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
37. Investigation of thermal cycle properties of glass-ceramic sealant for SOFC, International Symposium on Materials for Energy Storage and Conversion (2015), Ankara, Turkey.
38. Effects of lamination conditions on the performance of anode-supported solid oxide fuel cells, ECS Transactions, 68 (2015) 2357-2361.
39. İzostatik pres parametrelerinin katı oksit yakıt pili üzerindeki etkilerinin incelenmesi, 1. Savunma Sanayi Sempozyumu (2015), Kirikkale, Turkey.
40. GDC eklentisinin katı oksit yakıt pili katot performansına olan etkisi, 1. Savunma Sanayi Sempozyumu (2015), Kirikkale, Turkey.
41. Effects of lamination conditions on the performance of anode-supported solid oxide fuel cells, ECS Transactions, 68 (2015) 2357-2361.
42. The effects of mesh and interconnector design on SOFC performance, International Conference on Clean Energy 2014 (ICCE-2014), Istanbul, Turkey.
43. Optimum flow field geometry and mesh configurations for SOFC, Fuel Cell 2014 Science & Technology, Amsterdam, Holland, 2014.
44. Katı oksit yakıt pilleri için yüksek performanslı özgün elektrolit geliştirilmesi, 1st International Plasma Technologies Congress (2014), Kayseri, Turkey.
45. High performance electrolyte supported solid oxide fuel cell (SOFC) with novel electrolyte design, 10th International Electrochemistry Meeting (ECM10), Konya, Turkey, 2013.
46. Effects of operating conditions on the temperature distribution in a SOFC short stack, 220th ECS Meeting and Electrochemical Energy Summit, Boston, Massachusetts, USA, 2011.
47. The effects of anode microstructure on the performance of anode supported solid oxide fuel cell, 10th International Conference on Clean Energy, Gazimagusa, Cyprus, 2010.
48. Development of a high performance anode supported solid oxide fuel cell, 2nd International Conference on Nuclear & Renewable Energy Resources, Ankara, Turkey, 2010.
49. Effect of processing parameters on the performance of an nano-ion conductor infiltrated solid oxide fuel cells, ASME 2010 8th International Fuel Cell Science, Engineering & Technology Conference, Brooklyn, New York, USA, 2010.
50. Effect of nano ion conductor infiltration on the performance of anode supported solid oxide fuel cells, ECS Trans. 25  (2009) 559-566.
51. Effect of nano ion conductor infiltration on the performance of anode supported solid oxide fuel cells, 11th International Symposium on Solid Oxide Fuel Cells (SOFC-XI), Vienna, Austria, 2009.
52. Anode supported solid oxide fuel cells with nano-ion conductor infiltration, 6th China International Conference on High-Performance Ceramics (CICC-6), Harbin, China, 2009.
53. Effects of operation parameters on temperature gradient in a SOFC, Hyforum-2008, Changsha-China, 2008.
54. Doğrudan Metanol Yakıt Pilli Şarj Sistemi, 1. Uluslararası Plazma Teknolojileri Kongresi, 28 – 30 Nisan 2014, Kayseri/Türkiye.
55. Katı Oksit Yakıt Pillerinde Elektrot/Elektrolit Arayüzeyindeki Ayrışmaların 3 Boyutlu Mikro Modellemesi, 1. Uluslararası Plazma Teknolojileri Kongresi, 28 – 30 Nisan 2014, Kayseri/Türkiye.
56. Katı Oksit Yakıt Pilleri İçin Yüksek Performanslı Akış Kanalı Geliştirilmesi, , 1. Uluslararası Plazma Teknolojileri Kongresi, 28 – 30 Nisan 2014, Kayseri/Türkiye.
57. Development of Low Altitude Unmanned Aerial Vehicles with PEM Fuel Cell Power, 1. Uluslararası Plazma Teknolojileri Kongresi, 28 – 30 Nisan 2014, Kayseri/Türkiye.
58. The Electrical Stability Of Glass Ceramic Sealant In SOFC Stack Environment, 10th European SOFC Forum, 26 June – Friday, 29 June 2012 Kultur- und Kongresszentrum Luzern, Lucerne / Switzerland.
59. Selahattin ÇELİK, Effects Of The Co-Sınterıng The Anode And Cathode Plates Of Solıd Oxıde Type Fuel Cells On Performance Of System, International Conference on Hydrogen Production-2012 Seoul (Republic of Korea) June 24-27, 2012.
60. Theoretical and Experimental Investigation Two Phase Flow in Direct Methanol Fuel Cell, The 2nd International Hydrogen Energy Congress, İstanbul, 13-15 July 2007.
61. Termal Enerji Depolama Materyali Olarak Diyatomit/Faz Değiştiren Madde Kompozitlerinin Üretilmesi, Sözlü Sunu, Niğde İli Endüstriyel Hammaddeler Sempozyumu, 20 Nisan 2016.
62. Measurement and prediction of temperature distribution in an intermediate temperature solid oxide fuel cell, ASME 6th Annual Fuel Cell Science, Engineering and Technology, Denver, USA, 2008.
63. Investigation of heat and mass transfer in intermediate temperature solid oxide fuel cell, 2nd International Hydrogen Energy Congress, Istanbul, Turkey, 2007.
64. Experimental and theoretical study of metal-hydride reactors, ASME 2nd Energy Nanotechnology International Conference, California, USA, 2007.
65. Heat and mass transfer analysis in intermediate temperature solid oxide fuel cells (IT-SOFC), ICENES 2007, 13th International Conference on Emerging Nuclear Energy Systems, Istanbul, Turkey, 2007.
66. İzostatik pres parametrelerinin katı oksit yakıt pili üzerindeki etkilerinin incelenmesi, 1. Savunma Sanayi Sempozyumu (2015), Kirikkale, Turkey.
67. GDC eklentisinin katı oksit yakıt pili katot performansına olan etkisi, 1. Savunma Sanayi Sempozyumu (2015), Kirikkale, Turkey.
68. Elektrolit üretim parametrelerinin katı oksit yakıt pili performansına olan etkisi, II. KOP Bölgesel Kalkınma Sempozyumu (2014), Niğde, Türkiye.
69. Anot üretim parametrelerinin katı oksit yakıt pili performansına olan etkisi, II. KOP Bölgesel Kalkınma Sempozyumu (2014), Niğde, Türkiye.
70. KOYP stağında ideal hava ve yakıt oranlarının incelenmesi,II. KOP Bölgesel Kalkınma Sempozyumu (2014), Niğde, Türkiye.
71. Pres koşullarının YSZ elektrolit mekanik ve elektrokimyasal performansına olan etkisi, IV. Ulusal Güneş ve Hidrojen Enerjisi Kongresi (2014), Eskişehir, Turkiye.
72. YSZ eklentisinin cam seramik sızdırmazlık ısıl döngü dayanımına olan etkisi, IV. Ulusal Güneş ve Hidrojen Enerjisi Kongresi (2014), Eskişehir, Turkiye.
73. Kati oksit yakit pilleri redoks modellemesi, II. Ileri Teknoloji Calıstayı (ITC 2011), Istanbul, Turkiye, 2011.
74. Katot uretim parametrelerinin kati oksit yakıt pili oksijen indirgenme mekanizmasina olan etkisi, II. Ileri Teknoloji Calıstayı (ITC 2011), Istanbul, Turkiye, 2011.
75. Kati oksit yakit pilleri icin kontak malzeme gelistirilmesi, II. Ileri Teknoloji Calıstayı (ITC 2011), Istanbul, Turkiye, 2011.
76. Kati oksit yakıt hücresinde sicaklik dagilimina operasyon sartlarinin etkisi, II. Ileri Teknoloji Calıstayı (ITC 2011), Istanbul, Turkiye, 2011.
77. Anot destekli kati oksit yakıt hucresi uretiminde egilmenin azaltilmasi, II. Ileri Teknoloji Calıstayı (ITC 2011), Istanbul, Turkiye, 2011.
78. Anot yapısının anot destekli orta sıcaklık katı oksit yakıt pili performansına olan etkisi, IV. Ulusal Hidrojen Enerjisi Kongresi ve Sergisi, Kocaeli, Türkiye, 2009.
79. Nano iyonik iletken infiltre edilmiş anot destekli katı oksit yakıt pili, IV. Ulusal Hidrojen Enerjisi Kongresi ve Sergisi, Kocaeli, Türkiye, 2009.
80. Orta sıcaklık katı oksit yakıt pili içerisindeki sıcaklık dağılımına etki eden çalışma parametrelerinin incelenmesi, 17. Ulusal Isı Bilimi ve Tekniği Kongresi, Sivas, Türkiye, 2009.
81. Doğrudan metanol yakıt pili (DMYP) performansının deneysel incelenmesi, Ulusal Hidrojen Kongresi (UHK), İstanbul, Türkiye, 2006.
82. Katı oksit yakıt pillerinde kullanılan interkonnektör malzemelerinin araştırılması, Ulusal Hidrojen Kongresi (UHK), İstanbul, Türkiye, 2006.
83. Katı Oksit Yakıt Pillerinde Anot Akım Toplama Tabaka İçeriğinin Termal Döngü Üzerine Etkisinin İncelenmesi, Sözlü Sunu, UHTEK-2015 Ulusal Hidrojen Teknolojileri Kongresi 20-23 Aralık 2015, İstanbul
84. Katı Oksit Yakıt Pillerinde Yakıt Kullanımın Veriminin Deneysel İncelenmesi, Poster, UHTEK-2015 Ulusal Hidrojen Teknolojileri Kongresi 20-23 Aralık 2015, İstanbul.
85. Askeri Telsizler İçin Doğrudan Metanol Yakıt Pili Şarj Ünitesi Geliştirilmesi, 1. Savunma Sanayi Sempozyumu, pp.78-79, 09.04.2015.
86. Düşük İrtifalı İnsansız Hava Araçları İçin Metanol İle Çalışan Yakıt Pili Geliştirilmesi, II. Kop Bölgesel Kalkınma Sempozyumu, pp. 14, Niğde, 23.10.2014.
87. Hidrojen debisinin paralel düz kanallı KOYP sıcaklık dağılımına etkisi, II. Kop Bölgesel Kalkınma Sempozyumu, pp. 32, Niğde, 23.10.2014.
88. Askeri Sistemler İçin Doğrudan Metanol ile Çalışan Yakıt Pili Sistemi Geliştirilmesi, IV. Ulusal Güneş ve Hidrojen Enerjisi Kongresi, Eskişehir Osmangazi Üniversitesi, 22-23 Mayıs 2014.
89. Katı Oksit Yakıt Pillerinde Sızdırmazlığın Performansa Etkisinin İncelenmesi, İleri Teknoloji Çalıştayı, Bahçeşehir Üniversitesi, 09.12.2011 (ITÇ2011).
90. Doğrudan Metanollu Yakıt Pillerinde Türlerin Dağılımının Deneysel ve Nümerik Olarak Ölçülmesi, 4. Ulusal hidrojen enerjisi konferansı ve sergisi (UHK 2009).