2024

1. Quantitative estimation of triple phase boundaries in solid oxide fuel cell electrodes via artificial neural network, Fuel, 2024. 

2023

2. An example of artificial neural networks modeling the distribution of mercury (Hg), which poses a risk to human health in the selection of settlements: Sarayönü (Türkiye), Springer Science and Business Media LLC, 2023.
3. Investigation of S1046 profile bladed vertical axis wind turbine and artificial intelligence-based performance evaluation,  Energy Sources Part A-Recovery Utilization and Environmental Effects, 2023
   
4. The Effect of Leading-Edge Wavy Shape on the Performance of Small-Scale HAWT Rotors, Energies, 2023.
5.  Investigation of Deep Eutectic Solvent Based Super Dielectric Electrolytes for Supercapacitors, Energy, Environment and Storage, 2023.
6.  The effect of copper coated metal hydride at different ratios on the reaction kinetics, International Journal of Hydrogen Energy, 2023.
7.  Numerical and experimental studies on unitized regenerative proton exchange membrane fuel cell, International Journal of Hydrogen Energy, 2023.
8.  A comprehensive review on battery thermal management system for better guidance and operation, Energy Storage, 2023.
9.  An experimental and new study on thermal conductivity and zeta potential of Fe3O4/water nanofluid: Machine learning modeling and proposing a new correlation, Powder Technology, 2023.
10.  Techno‐enviro‐economic design of small‐scale membrane‐based seawater desalination systems integrated with hybrid autonomous renewable power systems, Environmental Progress & Sustainable Energy, 2023.
11.  From experimental data to predictions: Artificial intelligence supported new mathematical approaches for estimating thermal conductivity, viscosity and zeta potential in Fe3O4-water magnetic nanofluids, Powder Technology, 2023.
12.  Microstructural design of solid oxide fuel cell electrodes by micro-modeling coupled with artificial neural network, Powder Technology, 2023.
13.  Fabrication and optimization of LSM infiltrated cathode electrode for anode supported microtubular solid oxide fuel cells, International Journal of Hydrogen Energy, 2023.
14.  Estimation of microscale redox tolerance for Ni-based solid oxide fuel cell anodes via three-dimensional finite element modeling, International Journal of Hydrogen Energy, 2023.
15.  Optimizing infiltration parameters of nanostructured anode electrode in solid oxide fuel cells, Ceramics International, 2023.
16.  Effect of reduced graphene oxide addition on cathode functional layer performance in solid oxide fuel cells, International Journal of Hydrogen Energy, 2023.
17.  Novel concept of bolt-microtubular geometry for solid oxide fuel cells, Journal of Power Sources, 2023.
18.  Formability improvement in Ti–6Al–4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations, The International Journal of Advanced Manufacturing Technology, 2023.
19.  Vibration Analyses Of Railway Systems Using Proposed Neural Predictors, Neural Network World, 2023.
20.  Design of a biomimetic wing from maple samara and investigation of the aerodynamic performance, AIP Publishing, 2023.
21.  Experimentally determining the thermal properties of NiFe2O4 magnetic nanofluid under suitable stability conditions: Proposal the new correlation for thermophysical properties, Powder Technology, 2023.
22.  Experimental determination of NiFe2O4-water nanofluid thermophysical properties and evaluation of its potential as a coolant in polymer electrolyte membrane fuel cells, International Journal of Hydrogen Energy, 2023.
23.  Modeling the influence of coolant flow directions on thermal performance of PEM fuel cell cooling plates with serpentine and straight flow channels, Thermochimica Acta, 2023.
24.  A Modeling Study on Using Various Base Materials As Cooling Plate in Proton Exchange Membrane Fuel Cells, Begell House, 2023.
25.  Numerical Modeling of Mechanical Behavior of Functionally Graded Polylactic Acid–Acrylonitrile Benzidine Styrene Produced via Fused Deposition Modeling: Experimental Observations, Materials, 2023.
26.  Tensile behavior of functionally graded sandwich PLA-ABS produced via fused filament fabrication process, Mechanics of Advanced Materials and Structures, 2023.
27.  A comparison study on experimental characterization of unidirectional fiber reinforced composites using strain-gauges and virtual extensometers, Walter de Gruyter GmbH, 2023. 

2022

28. Performance analysis of Savonius wind turbines in different models, Wind Engineering, 2022.
29. .Fabrication of glass ceramic sealants with ceramic fiber filler for solid oxide fuel cells,  Ceramics International, 2022.
    
30. Development of ceramic fiber reinforced glass ceramic sealants for microtubular solid oxide fuel cells, Ceramics International, 2022.
    
31. Effects of pore former type on mechanical and electrochemical performance of anode support microtubes in solid oxide fuel cells, International Journal of Hydrogen Energy, 2022.
    
32. Investigation of external compression in scaling up of planar solid oxide fuel cells, International Journal of Hydrogen Energy, 2022.
    
33. Tape casting coupled with isostatic pressing as an alternative fabrication method for microtubular solid oxide fuel cells, International Journal of Hydrogen Energy, 2022.
    
34. Development of titanium bipolar plates fabricated by additive manufacturing for PEM fuel cells in electric vehicles, International Journal of Hydrogen Energy, 2022.
    
35. Synthetical designing of solid oxide fuel cell electrodes: Effect of particle size and volume fraction, International Journal of Hydrogen Energy, 2022.
    
36. Mesh patterned electrolyte supports for high-performance solid oxide fuel cells,  International Journal of Energy Research, 2022.
    
37. Nanoengineering electrode for yttria-stabilized zirconia-based symmetrical solid oxide fuel cells to achieve superior output performance, Separation and Purification Technology, 2022.
    
38. Impact of lamination conditions on microtubular solid oxide fuel cells fabricated by tape casting coupled with isostatic pressing, Journal of Power Sources , 2022.
39.  Stress-strain distribution and failure mechanisms in dual-phase steels investigated with microstructure-based modeling, FapUNIFESP (SciELO), 2022.
40.  Numerical and Experimental Comparison of Fractural Characteristics of 316L Stainless Steel, Journal of Materials Engineering and Performance, 2022.
41.  Numerical Investigation of the Use of Boron Nitride/Water and Conventional Nanofluids in a Microchannel Heat Sink, MDPI AG Processes, 2022.
42.  Channel to rib width ratio effect on thermal performance of cooling plate in polymer electrolyte membrane fuel cell, Fuel Cells, 2022.
43.  Design of neural predictors for predicting and analysing COVID-19 cases in different regions, Neural Network World, 2022.
44.  Three-dimensional numerical simulation and experimental validation on ammonia and hydrogen fueled micro tubular solid oxide fuel cell performance, International Journal of Hydrogen Energy, 2022.
45.  Experimental investigation on the effect of anode functional layer on the performance of anode supported micro-tubular SOFCs, International Journal of Hydrogen Energy, 2022. 

2021

46. Effective Flow Control Around a Circular Cylinder by Using Both a Splitter Plate and Plasma Actuators as Passive and Active Control Methods, Isı Bilimi ve Tekniği Dergisi, 2021.
    
47. Influence of Leading-Edge Tubercle with Amplitude Modulation on NACA 0015 Airfoil, AIAA Journal, 2021.
    
48. Free Vibration Analysis Of An Aluminum Beam Coated With Imperfect And Damaged Functionally Graded Material, Archive of Applied Mechanics, 2021.
    
49. Modal Analysis Of An Aluminum Beam Coated With Damaged And Porous Functionally Graded Material, Materialwissenschaft und Werkstofftechnik, 2021.
50.  A comprehensive and comparative experimental analysis on thermal conductivity of TiO2-CaCO3/Water hybrid nanofluid: Proposing new correlation and artificial neural network optimization, Heat Transfer Research, 2021.
51.  Location based optimal sizing of hybrid renewable energy systems using deterministic and heuristic algorithms, International Journal of Energy Research, 2021.
52.  Optimal sizing of off-grid hydrokinetic-based hybrid renewable power systems for a house load demand, International Journal of Energy Research, 2021.
53.  Development of high performance and low-cost solid oxide fuel cell stacks: Numerical optimization of flow channel geometry, International Journal of Energy Research, 2021.
54.  Engineering solid oxide fuel cell electrode microstructure by a micro-modeling tool based on estimation of TPB length, International Journal of Hydrogen Energy, 2021.
55.  Improving the electrochemical performance of solid oxide fuel cells by surface patterning of the electrolyte, Journal of Power Sources, 2021. 
56. Power and Performance Analysis of Light Bicycle on Different Road Profiles, International Review of Applied Sciences and Engineering, 2021.
    
57. Installation of Test Setup and Measurement Procedures in Fir Wood Hydraulic Conductance Measurement, Drvna Industrija, 2021.
    
58. Effects of Shell Aspect Ratio and Combustion Chamber Location on Thermal–Hydraulic Performance of Hot-Water Steel Boilers Under Steady-State Operation, Arabian Journal for Science and Engineering, 2021.
    
59. Experimental investigation of heat conduction characteristics of density-layered stone wool materials, International Communications in Heat and Mass Transfer, 2021.
    

2020

60. Single phase flow of nanofluid including graphite and water in a microchannel, Heat and Mass Transfer, 2020.
    
61. Experimental study for predicting the specific heat of water based Cu-Al2O3 hybrid nanofluid using artificial neural network and proposing new correlation, International Journal of Energy Research, 2020.
    
62. Experimental Study on the Specific Heat Capacity Measurement of Water-Based Al2O3-Cu Hybrid Nanofluid by using Differential Thermal Analysis Method, Current Nanoscience, 2020.
    
63. Investigating The Effects Of Plasma Actuator On The Flow Control Around NACA2415 Airfoil, Journal of Thermal Science and Technology, 2020.
    
64. Aerodynamic and energy-efficiency-based assessment of plasma actuator’s position on a NACA0015 airfoil, Contributions to Plasma Physics, 2020.
    
65. Experimental and numerical studies on improvementof drag force of a bus model using different spoilermodels, International Journal of Heavy Vehicle Systems, 2020.
    
66. Free Vibration Analysis of a Functionally Graded Material Coated Aluminum Beam, AIAA Journal, 2020.
    
67. Free vibration analysis of cracked functionally graded non-uniform beams, Materials Research Express, 2020.
    
68. Free Vibration Analysis of Functionally Graded Beams with Cracks, Journal of Applied and Computational Mechanics, 2020.
    
69. Free vibration analysis of a single edge cracked symmetric functionally graded stepped beams, Advances in Structural Engineering, 2020.
    
70. Experimental optimization of the fabrication parameters for anode-supported micro-tubular solid oxide fuel cells, International Journal of Hydrogen Energy, 2020.
71.  Analysis of wind energy potential and Weibull parameter estimation methods: a case study from Turkey, International Journal of Environmental Science and Technology, 2020.
72.  A techno-economic assessment of landfill gas emissions and energy recovery potential of different landfill areas in Turkey, Journal of Cleaner Production, 2020.
73.  Design and fabrication of novel interconnectors for solid oxide fuel cells via rubber pad forming, International Journal of Energy Research, 2020.
74.  Novel structured anode-supported solid oxide fuel cells with porous GDC interlayers, Ceramics International, 2020.
75.  Comparison of electrolyte fabrication techniques on the performance of anode supported solid oxide fuel cells, International Journal of Hydrogen Energy, 2020.
76.  Prediction of Strain Limits via the Marciniak-Kuczynski Model and a Novel Semi-Empirical Forming Limit Diagram Model for Dual-Phase DP600 Advanced High Strength Steel, Strojniški vestnik – Journal of Mechanical Engineering, 2020.
77.  Thickness dependent yielding behavior and formability of AA6082-T6 alloy: experimental observation and modeling, The International Journal of Advanced Manufacturing Technology, 2020.
78.  Investigation of formability of metallic bipolar plates via stamping for light-weight PEM fuel cells, International Journal of Hydrogen Energy, 2020.
79.  Analysis of Yield Criteria and Flow Curves on FLC for TWIP900 Steel,  Experimental Techniques, 2020. 
80. Musical mirror-symmetrical movement tasks: comparison of rhythm versus melody-playing, Neuroreport, 2020.
    
81. Analysis of natural convection in a square cavity in the presence of a rotating cylinder with a specific number of roughness components, International Communications in Heat and Mass Transfer, 2020.
    

2019

82. The effect of a novel spark-plug plasma synthetic jet actuator on the performance of a PEM fuel cell, International Journal of Heat and Mass Transfer, 2019.
    
83. Predicting potential of pressure retarded osmosis power for different estuaries in Turkey, Environmental Progress & Sustainable Energy, 2019.
    
84. Wind power forecasting based on daily wind speed data using machine learning algorithms, Energy Conversion and Management, 2019.
    
85. Performance evaluation of ejector with different secondary flow directions and geometric properties for solid oxide fuel cell applications, Journal of Power Sources, 2019.
    
86. Influence of doctor blade gap on the properties of tape cast NiO/YSZ anode supports for solid oxide fuel cells, Ceramics International, 2019.
    
87. Glass fiber reinforced sealants for solid oxide fuel cells, International Journal of Hydrogen Energy, 2019.
    
88. Effects of solid loading on joining and thermal cycling performance of glass-ceramic sealing pastes for solid oxide fuel cells, Ceramics International, 2019.
    
89. Microstructure based modelling of stress–strain relationship on dual phase steels, Ironmaking & Steelmaking, 2019.
    
90. The effects of temperature and strain rate on yielding and springback behaviour of DP1000 dual phase steel, Materials Research Express, 2019.
    
91. Simulation of biomass gasification in a BFBG using chemical equilibrium model and restricted chemical equilibrium method, Biomass Bioenergy, 2019.

2018

92. Effect of Signal Modulation of DBD Plasma Actuator on Flow Control around NACA 0015, Journal of Thermal Science and Technology, 2018.
    
93. A Study on the Plasma Actuator Electrode Geometry Configurations for Improvement of the Aerodynamic Performance of an Airfoil, Strojniski Vestnik-Journal of Mechanical Engineering, 2018.
    
94. Methodology for a techno-economic evaluation of electricity production and GHG emissions estimation in landfill sites, International Journal of Global Warming, 2018.
    
95. Integration of hybrid power (wind-photovoltaic-diesel-battery) and seawater reverse osmosis systems for small-scale desalination applications, Desalination, 2018.
    
96. Determination of formability characteristics of Crofer 22 APU sheets as interconnector for solid oxide fuel cells, International Journal of Hydrogen Energy, 2018.
    
97. Transport phenomena of convergent and divergent serpentine flow fields for PEMFC, Energy, 2018.
    
98. The role of tape thickness on mechanical properties and performance of electrolyte supports in solid oxide fuel cells, Ceramics International, 2018.
    
99. Numerical Investigation of Convergent and Divergent Parallel Flow Fields for PEMFCs, Fuel Cells, 2018.
    
100. Geometric optimization of an ejector for a 4 kW SOFC system with anode off-gas recycle, International Journal of Hydrogen Energy, 2018.
     
101. Determination of formability characteristics of Crofer 22 APU sheets as interconnector for solid oxide fuel cells, International Journal of Hydrogen Energy, 2018.
     
102. Design of Neural Predictor for Performance Analysis of Mountain Bicycles, Recent Innovations in Mechatronics (RIiM), 2018.
     
103. Numerical optimization of channel to land width ratio for PEM fuel cell, International Journal of Hydrogen Energy, 2018.
     
104. Creating The Optimum Panel Inclination Angles of The Southern Aegean Region, International Journal of Advances in Science Engineering and Technology, 2018.
     
105. Strain Rate Sensitivity and Strain Hardening Response of DP1000 Dual Phase Steel, Metallurgical Research Technology, 2018.
     
106. Warm deformation and fracture behaviour of DP1000 advanced high strength steel, Ironmaking & Steelmaking, 2018.
     
107. The effects of temperature and strain rate on yielding and springback behaviour of DP1000 dual phase steel, Materials Research Express, 2018.
     
108. 3D Microstructural Finite Element Simulation of Martensitic Transformation of TRIP Steels, Latin American Journal of Solids and Structures, 2018
     
109. Influence of sintering support design on the properties of NiO-YSZ anode support micro-tubes, Ceramics International 44 (2018) 5587-5593.
110. Optimal design of a Hydrogen Refuelling Station (HRFS) powered by Hybrid Power System, Energy Conversion and Management , 2018
111. Techno-economical evaluation of a hydrogen refuelling station powered by Wind-PV hybrid power system: A case study for İzmir-Çeşme, International Journal of Hydrogen Energy , 2018

2017

112. Determination of optimum ejector operating pressures for anodic recirculation in SOFC systems, International Journal of Hydrogen Energy 42 (2017) 20241-20251.
113. Purity investigation of hydrogen produced by hydrolysis of sodium borohydride via phosphoric acid process, Chemical Problems, 2 (2017) 136-145.
114. Design and fabrication of novel anode flow-field for commercial size solid oxide fuel cells, Journal of Power Sources 346 (2017) 49-55.
115. Experimental performance investigation of minichannel water cooled-thermoelectric refrigerator, Case Studies in Thermal Engineering , 2017
116. Integration of hybrid power (wind-photovoltaic-diesel-battery) and seawater reverse osmosis systems for small-scale desalination applications, Desalination 2017
117. Reduction of fluid forces acting on a square prism using a planar jet, Experimental Thermal and Fluid Science , 2017
118. Active control of flow around a circular cylinder by using intermittent DBD plasma actuators, Flow Measurement and Instrumentation , 2017
119. Magnetic conductive polymer-graphene nanocomposites based supercapacitors for energy storage, Energy , 2017
120. Novel convergent-divergent serpentine flow fields effect on PEM fuel cell performance, International Journal of Hydrogen Energy , 2017
121. Comparison of the Linear and Spanwise-Segmented DBD Plasma Actuators on Flow Control Around a NACA0015 Airfoil, IEEE Transactions on Plasma Science , 2017
122. Performance prediction of PEM fuel cell with wavy serpentine flow channel by using artificial neural network, International Journal of Hydrogen Energy , 2017
123. Microstructure based modelling of stress–strain relationship on dual phase steels, Ironmaking Steelmaking , 2017
124. Warm deformation and fracture behaviour of DP1000 advanced high strength steel, Ironmaking Steelmaking

2016

125. Effects of fabrication parameters on the performance of solid oxide electrolyzer cell, International Journal of Hydrogen Energy 41 (2016) 9723-9730.
126. Development of anodes for direct oxidation of methane fuel in solid oxide fuel cells, International Journal of Hydrogen Energy 41 (2016) 10021-10029.
127. Effects of operation temperature and reactant gas humidity level on performance of PEM fuel cells, Renewable and Sustainable Energy Reviews 59C (2016) 1298-1306.
128. Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method, International Journal of Hydrogen Energy 41 (2016) 10037-10043.
129. A review on cell/stack designs for high performance solid oxide fuel cells, Renewable and Sustainable Energy Reviews 56C (2016) 1101-1121.
130. A review on micro-level modeling of solid oxide fuel cells, International Journal of Hydrogen Energy 41 (2016) 9968-9981.
131. Investigation of temperature distribution and performance of SOFC short stack with/without machined gas channels, International Journal of Hydrogen Energy 41 (2016) 10030-10036.
132. Microstructural finite element modeling of redox behavior of Ni?YSZ based ceramic SOFC anodes, Ceramics International 42 (2016) 8915-8924.
133. Technical and economic evaluation of freshwater production from a wind powered small scale seawater reverse osmosis system WP SWRO, Desalination , 2016
134. Prediction of graphite nanofluids dynamic viscosity by means of artificial neural networks, International Communications in Heat and Mass Transfer , 2016
135. Bir Çekici Römork Aracında Sürükleme Kuvvetinin Pasif Akış Kontrol Yöntemleri İle İyileştirilmesi, ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology , 2016
136. Effect of the duty cycle on the spark plug plasma synthetic jet actuator, EPJ Web of Conferences , 2016
137. Effect of plasma actuator and splitter plate on drag coefficient of a circular cylinder, EPJ Web of Conferences , 2016
138. The Determination Of Aerodynamic Drag Coefficient Of Truck and Trailer Model By Wind Tunnel Tests, International Journal of Automotive Engineering and Technologies , 2016
139.  Drag Force Estimation of a Truck Trailer Model Using Artificial NeuralNetwork, International Journal of Automotive Engineering and Technologies , 2016
140. Numerical investigation of effects of ramification length and angle on pressure drop and heat transfer in a ramified microchannel, Journal of Applied Fluid Mechanics , 2016
141. Contribution of functionally graded material modelling on finite element simulation of rod end parts in automotive steering system, Journal of Mechanical Science and Technology , 2016
142. Microstructural finite element modeling of redox behavior of Ni YSZ based ceramic SOFC anodes, Ceramics International , 2016
143. Parameters Determination of Yoshida Uemori Model Through Optimization Process of Cyclic Tension Compression Test and V Bending Springback, Latin American Journal of Solids and Structures , 2016

2015

144. Mechanical and electrochemical behavior of novel electrolytes based on partially stabilized zirconia for solid oxide fuel cells, Ceramics International 41 (2015) 8785-8790.
145. Strength evaluation of glass-ceramic composites containing yttria stabilized zirconia, Ceramics International 41 (2015) 6985-6990.
146. The role of lamination conditions on electrochemical and mechanical performance of ceramic electrolytes for solid oxide fuel cells, Ceramics International 41 (2015) 2057-2068.
147. A performance prediction tool for solid oxide fuel cells after single redox cycle, Fuel Cells 15 (2015) 71-89.
148. Effects of bolt torque and contact resistance on the performance of the polymer electrolyte membrane electrolyzers, Journal of Power Sources 281 (2015) 103-113.
149. Influential parameters and performance of a glass-ceramic sealant for solid oxide fuel cells, Ceramics International 41 (2015) 2744-2751.
150. Investigation of gas generation in regenerative fuel cells by low-energy X-rays, Journal of Power Sources 296 (2015) 133-141.
151. Effects of mesh and interconnector design on solid oxide fuel cell performance, International Journal of Hydrogen Energy, International Journal of Hydrogen Energy 40 (2015) 7829-7834.
152. Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell, International Journal of Hydrogen Energy 40 (2015) 7895-7902.
153. Optimum processing parameters to improve sealing performance in solid oxide fuel cells, Ceramics International 41 (2015) 9834-9842.
154. Determining the best model for estimation the monthly mean daily global solar radiation on a horizontal surface A case study in Nigde Turkey, World Journal of Engineering , 2015
155. Comparison of Empirical Models for the Estimation of Monthly Global Solar Radiation at Nigde in Turkey, British Journal of Applied Science & Technology , 2015
156. Exergy analysis of Eregli sugar factory, World Journal of Engineering , 2015
157. Experimental and numerical aerodynamic investigation of a prototype vehicle, Wind and Structures , 2015
158. Flow past a square prism with an upstream control rod at incidence to uniform stream, Ocean Engineering , 2015
159. The Numerical Investigation of Aerodynamic Structures of Truck and Trailer Combinations, International Journal of Automotive Engineering and Technologies , 2015
160. The passive flow control around a truck trailer model Bir kamyon römork modeli etrafındaki pasif akış kontrolü, International Journal of Automotive Engineering and Technologies , 2015
161. Free vibration analysis of damaged composite beams, Structural Engineering and Mechanics , 2015
162. Free vibration analysis of edge cracked symmetric functionally graded sandwich beams, Structural Engineering and Mechanics , 2015
163. Investigations the Effect of Oil Quality on Gearboxes Using Neural Network Predictors, Industrıal Lubrıcatıon And Trıbology , 2015
164. Comparison Of G G Methods for Finding Exact Solutions of the Drinfeld Sokolov System, Mathematica Slovaca , 2015
165. Modelling and Controller Design for a Flexible Structure System against Disturbance Effects, Low Frequency Noise, Vibration and Active Control , 2015

2014

166. Effects of ceramic based pastes on electrochemical performance of solid oxide fuel cells, Ceramics International 40 (2014) 8575-8583.     
167. Effects of anode fabrication parameters on the performance and redox behavior of solid oxide fuel cells, Journal of Power Sources 258 (2014) 108-116.
168. A novel two-part interconnector for solid oxide fuel cells, International Journal of Energy Research 38 (2014) 1835-1842
169. Eğilme dayanimi iyileştirilmiş anot destekli kati oksit yakit pili geliştirilmesi, Havacilik ve Uzay Teknolojileri Dergisi 7 (2014) 45-53.
170. Three dimensional stress analysis of solid oxide fuel cell anode micro structure, International Journal of Hydrogen Energy 39 (2014) 19119-19131.
171. Free vibration analysis of laminated composite beam under room and high temperatures, Structural Engineering and Mechanics , 2014
172. Evaluation of Anisotropy by Two Different Tests for TRIP800 Steel, Key Engineering Materials , 2014
173. Effects of Anisotropic Yield Functions on Prediction of Forming Limit Diagrams of DP600 Advanced High Strength Steel, Procedia Engineering , 2014
174. Design and Actuator Selection of a Lower Extremity Exoskeleton, IEEE/ASME Transactions on Mechatronics , 2014
175. Force Feedback Control of Lower Extremity Exoskeleton Assisting of Load Carrying Human, Applied Mechanics and Materials , 2014
176. Mechanical Design of Lower Extremity Exoskeleton Assisting Walking of Load Carrying Human, Applied Mechanics and Materials , 2014

2013

177. Measurement of the temperature distribution in a large solid oxide fuel cell short stack, International Journal of Hydrogen Energy 38 (2013) 10534-10541.  
178. Design and fabrication of stair-step type electrolyte structure for solid oxide fuel cells, International Journal of Energy Research 37 (2013) 631-637.
179. Electrochemical behaviour and sulfur tolerance of VxMo(1-x)Oy  as SOFC anode, Ceramics International 39 (2013) 7053-7061.
180. Effect of binder burnout on the sealing performance of glass ceramics for solid oxide fuel cells, Journal of Power Sources 242 (2013) 775-783.
181. Effects of operating parameters on the performance of a high-pressure proton exchange membrane electrolyzer, International Journal of Energy Research 37 (2013) 457-467.
182. Two-phase flow in a proton exchange membrane electrolyzer visualized in situ by simultaneous neutron radiography and optical imaging, International Journal of Hydrogen Energy 38 (2013) 5823-5835.
183. Effects of reactor design on TiFe hydride s hydrogen Storage, International Journal of Energy Research , 2013
184. Active Control of Flow around NACA 0015 Airfoil by Using DBD Plasma Actuator, EPJ Web of Conferences , 2013
185. Active control of flow around a square prism by slot jet injection, EPJ Web of Conferences , 2013
186. Burnup Extension of the Fixed Bed Nuclear Reactor Using Alternative Fuels, Energy Conversion and Management , 2013
187. Analysis of Photovoltaic Actuated Water Pump System Using Neural Network, Far East Journal of Applied Mathematics , 2013
188. Strain Hardening and Strain Rate Sensitivity Behaviors of Advanced High Strength Steels, Journal of Iron and Steel Research, International , 2013
189. Hybrid Controller Design for Two Floors Structure against Northridge Earthquake, Applied Mechanics and Materials , 2013
190. Experimental Investigation of Full Order Observered and LQR Controlled Building Like Structure Under Seismic Excitation, Applied Mechanics and Materials , 2013
191. Deflection Control of Two Floors Structure Against Northridge Earthquake by Using PI Controlled Active Mass Damping, Applied Mechanics and Materials , 2013
192. Heat transfer enhancement in annular fins using functionally graded material, Heat Transfer-Asian Research , 2013

2012

193. Development of high performance anode supported solid oxide fuel cell, International Journal of Energy Research 36 (2012) 1383-1387.
194. Novel electrolytes for solid oxide fuel cells with improved mechanical properties, International Journal of Hydrogen Energy 37 (2012) 13499-13509.
195. Novel structured electrolytes for solid oxide fuel cells, Journal of Power Sources 213 (2012) 47-54.
196. Effects of electrolyte pattern on mechanical and electrochemical properties of solid oxide fuel cells, Ceramics International 38 (2012) 5651-5659.
197. An Experimental Study on Hydrogen Storage Capabilities Improvement of the TiFe H, Recovery, Utilization, and Environmental Effects , 2012
198. Enhancement of Single Lap Composite Joints Strength at DifferentTemperatures, Journal Of Adhesıon Scıence and Technology , 2012
199. Buckling and compressive failure of stepped lap joints repaired with composite patches,   Journal of Composite Materials , 2012
200. Experimental and numerical investigation of pressure drop coefficient and static pressure difference in a tangential inlet cyclone separator, Chemical Papers , 2012
201. Formability and springback characterization of TRIP800 advanced high strength steel, Materials & Design , 2012

2011

202. Novel structured gadolinium doped ceria based electrolytes for intermediate temperature solid oxide fuel cells, Journal of Power Sources 196 (2011) 9361-9364.
203. Anode-supported solid oxide fuel cells with ion conductor infiltration, International Journal of Energy Research, 35 (2011) 1048-1055.
204. Development and testing of a highly efficient proton exchange membrane (PEM) electrolyzer stack, International Journal of Hydrogen Energy 36 (2011) 11480-11487.
205. Fossil fuel sustainability Exergy assessment of a cogeneration system, International Journal of Energy Research , 2011
206. Akış Kontrol Çubuğu İle Kare Kesitli Bir Küt Cisim Etrafındaki Akış Kontrolünde Hücum Açısının Girdap Kopma Olayına Etkisi, ISI Bilimi ve Teknigi Dergisi-Journal of Thermal Science and Technology , 2011
207. Analyses of Laminated Cantilever Composite Beams by Model Order Reduction Techniques, Mechanics Based Design of Structures and Machines , 2011
208. Experimental and numerical analysis of single lap composite joints with inter adherend fibers, Composites Part B: Engineering , 2011
209. Effect of Pre Straining on the Spring back Behavior of the AA5754 0 Alloy, Materiali in Tehnologije , 2011
210. Neutronic performance of CANDU reactor fuelling with ThC2 233UC2, International Journal of Energy Research , 2011
211. Design of a modified linear quadratic regulator for vibration control of suspension systems, International Review of Applied Sciences and Engineering , 2011
212. Effects of Surface Roughness on the Performance of Tangential Inlet Cyclone Separators, Aerosol Science and Technology , 2011
213. Flow curve prediction of Al Mg alloys under warm forming conditions at various strain rates by ANN, Applied Soft Computing , 2011
214. Modeling Uniaxial Temperature and Strain Rate Dependent Behavior of AZ31 Alloy by Softening Model, Key Engineering Materials , 2011
215. The Effects of Material Thickness and Deformation Speed on Springback Behavior of DP600 Steel, Advanced Materials Research , 2011
216. The Effect of Strain Rate Sensitivity on Formability of AA 5754 O at Cold and Warm Temperatures, Journal of Materials Engineering and Performance , 2011

2010

217. Measurement and estimation of species distribution in a direct methanol fuel cell, International Journal of Hydrogen Energy 35 (2010) 2151-2159.
218. Hydrogen generation from small scale wind powered electrolysis system in different power matching modes, International Journal of Hydrogen Energy , 2010
219. Control of Flow around a Square Prism by Slot Jet Injection from the Rear Surface, Experımental Thermal And Fluıd Scıence , 2010
220. Usability of cyclone separators as air filters in vehicles, Int. J. Vehicle Design , 2010
221. Modeling uniaxial temperature and strain rate dependent behavior of Al Mg alloys, Computational Materials Science , 2010
222. Influence of aging treatment on mechanical properties of 6061 aluminum alloy, Materials & Design , 2010
223. Effects of aging parameters on formability of 6061 O alloy, Materials & Design , 2010
224. Tensile deformation behavior of AA5083 H111 at cold and warm temperatures, International Journal of Materials Research , 2010
225. Effects Of Varıatıons In Alloy Content And Machınıng Parameters On Thestrength Of The Intermetallıc Bondıng Between A Dıesel Pıston And A Rıngcarrıer, Materıalı In Tehnologıje

2009

226. Effect of design parameters on enhancement of hydrogen charging in metal hydride reactors, International Journal of Hydrogen Energy 34 (2009) 2288-2294.
227. Effect of Nano Ion Conductor Infiltration on the Performance of Anode Supported Solid Oxide Fuel Cells, ECS Trans. 25 (2), 559,2009.
228. Empirical relationship for humidity and temperature at Quetta, Pakistan”, Mathematical And Computer Modelling, 50 (9-10), 1495-1497, 2009.
229. Evaluation of electricity generation and energy cost of wind energy conversion systems WECSs in Central Turkey, Applied Energy , 2009
230. Evaluation of Wind Characteristics and Energy Potential in Kayseri Turkey, Journal of Energy Engineering , 2009
231. An Experimental Investigation on Heat Transfer Characteristics of Confined and Unconfined Impinging Jets, Technology , 2009
232. Experimental and numerical failure analysis of pinned joints in composite materials, Composite Structures , 2009
233. Oils quality and performance analysis of vehicle s engines using radial basis neural networks, Industrial Lubrication and Tribology , 2009
234. Numerical investigation of performance characteristics of a cyclone prolonged with a dipleg, Chemical Engineering Journal , 2009
235. Evaluations of turbulence models for highly swirling flows in cyclones, CMES , 2009
236. Evaluation of tensile behaviour of 5754 aluminium magnesium alloy at cold and warm temperatures, Materials Science and Technology , 2009
237. Effects of cold and warm temperatures on springback of aluminium magnesium alloy 5083 H111, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , 2009
238. Tensile and Spring Back Behavior of DP600 Advanced High Strength Steel at Warm Temperatures, Journal of Iron and Steel Research, International , 2009

2008

239. Flow Field and Heat Transfer Characteristics in an Oblique Slot Jet Impinging on a Flat Plate, Internatıonal Communıcatıons In Heat And Mass Transfer , 2008
240. Force analysis of bearings on a modified mechanism using proposed recurrent hybrid neural networks, Journal of Mechanical Science and Technology , 2008
241. Force Analysis of Bearings on Cranes Using a Proposed Recurrent Hybrid Neural Network, Zeszyty Naukowe Politechniki Poznanskiej , 2008
242. Evolution of transformation characteristics with heating cooling rate in NiTi shape memory alloys, Journal of Materials Proccessing Technology , 2008
243. Performance analysis of numerical schemes in highly swirling turbulent flows in cyclones, Current Sci. , 2008
244. Evaluation Of Tensile Properties Of High Strength Steels At Warm Temperatures and Various Straın Rates, Steel Research International , 2008
245. Review of warm forming of aluminum magnesium alloys, Journal of Materials Processing Technology , 2008

2007

246. Investigation of wind characteristics and wind energy potential in Kirklareli Turkey, Renewable Energy , 2007
247. A Techno Economical Evaluation for Installation of Suitable Wind Energy Plants in Western Marmara Turkey, Energy, Exploration & Exploitation , 2007
248. Analysis of Tempering Treatment on Material Properties of DIN 41Cr4 and DIN 42CrMo4 Steels, Journal of Materials Engineering and Performance , 2007
249. An Experimental Study on the Effects of Uniform Injection through One Perforated Surface of a Square Cylinder on Some Aerodynamic Parameters, Experımental Thermal And Fluıd Scıence , 2007
250. CFD investigation of the flow and heat transfer characteristics in a tangential inlet cyclone, International Communications in Heat and Mass Transfer , 2007
251. Evaluation of tensile properties of 5052 type aluminum magnesium alloy at warm temperatures, Archives of Materials Science and Engineering , 2007

2006

252. Investigation of thermal aspects of hydrogen storage in a LaNi5-H2 reactor” International Journal of Energy Research 30(6), 447-458, 2006.
253. Flow Around a Rotatable Square Cylinder Plate Body, AIAA Journal , 2006
254. Frequency domain analysis of model order reduction techniques, Finite Elements in Analysis and Design , 2006

2005

255. Hydrogen as burner fuel: modelling of hydrogen-hydrocarbon composite fuel combustion and NOx formation in a small burner” Int. J. Energy Research 29(11), 973-990, 2005.
256. Investigations of hydrogen and hydrogen-hydrocarbon composite fuel combustion and NOx emission characteristics in a model combustor” Int. J. Hydrogen Energy, 30, 1139–1147, 2005.
257. An Axperimental and Theoretical Study on LaNi5-H2 in Two Different designated Reactors”, Int. J. Hydrogen Energy, 30 (13-14), 1437-1446, 2005.
258. Rejuvenation of spent fuel in the force free helical reactor FFHR, Annals of Nuclear Energy , 2005
259. Neutronic analysis of denaturing plutonium in a thorium fusion breeder and power flattening, Energy Conversion and Management , 2005
260. Control of the Flow around a Square Cylinder at Incidence by using a rod, AIAA Journal , 2005

2004

261. Numerical Investigation of Heat and Mass Transfer in a Metal Hydride Bed” Applied Mathematics and Computation, 150(1), 169-180, 2004.
262. Flow Around a Rotatable Circular Cylinder Plate Body at Subcritical Reynolds Numbers, AIAA Journal , 2004
263. An assessment of thorium and spent LWR fuel utilization, Energy Conversıon And Management , 2004
264. The Neutron Production Cross Sections for Pb Bi and Au Targets and Neutron Multiplicity for Nuclear Spallation Reaction Induced by 20 to 1600 MeV Protons, Nuclear Science and Engineering , 2004

2003

265. Mathematical Modeling of Hydrogen Storage in a LaNi5 Metal-Hydride Bed” Int. J. Energy Research, 27(11), 1027–1038, 2003.
266. Energy and exergy analyses of sugar production stages, International Journal of Energy Research , 2003

2002

267. Investigation of Three-Dimensional Heat and Mass Transfer in a Metal Hydride Reactor’’, Int. J. Energy Research, 26(11), 973–986, 2002.
268. A Three Dimensional Mathematical Model for Absorption in a Metal Hydride Bed’’ Int. J. Hydrogen Energy; 27(10), 1049–1056, 2002.
269. Power flattening and minor actinide burning in a thorium fusion breeder, Energy Conversion and Management , 2002

2001

270. Numerical study of hydrogen absorption in a La Ni5 hydride reactor’’, Int. J. Hydrogen Energy; 26(9): 957-963, 2001.

2000

271. Investigation of neutronic potential of a moderated D T fusion driven hybrid reactor fueled with thorium to breed fissile fuel for LWRs, Energy Conversion and Management , 2000
272. A Neural Network for Analysis of Vibration in Mechanical Systems Arising from Unbalance, Neural Network World , 2000

1999

273. Spent mixed oxide fuel rejuvenation in fusion breeders, Fusion Engineering and Design , 1999