PUBLICATIONS

1. Microstructural design of solid oxide fuel cell electrodes by micro-modeling coupled with artificial neural network, Powder Technology, (2023): 118551.
   
2. Optimizing infiltration parameters of nanostructured anode electrode in solid oxide fuel cells, Ceramics International, (2023).
   
3. Fabrication and optimization of LSM infiltrated cathode electrode for anode supported microtubular solid oxide fuel cells, International Journal of Hydrogen Energy, 48.26 (2023): 9833-9844.
   
4. Estimation of microscale redox tolerance for Ni-based solid oxide fuel cell anodes via three-dimensional finite element modeling, International Journal of Hydrogen Energy, 48.3 (2023): 1060-1074.
   
5. Experimental investigation on the effect of anode functional layer on the performance of anode supported micro-tubular SOFCs, International Journal of Hydrogen Energy, 47 (2022) 19741-19751.
   
6. Development of titanium bipolar plates fabricated by additive manufacturing for PEM fuel cells in electric vehicles, International Journal of Hydrogen Energy, (2022).
   
7. Determination of methanol concentration for DMFC systems by fuel cell‐based sensor. Fuel Cells 22.1-2 (2022): 31-38.
   
8. Nanoengineering electrode for yttria-stabilized zirconia-based symmetrical solid oxide fuel cells to achieve superior output performance, Separation and Purification Technology, 295 (2022) 121174.
   
9. Synthetical designing of solid oxide fuel cell electrodes: Effect of particle size and volume fraction, International Journal of Hydrogen Energy, (2022).
   
10. Three-dimensional numerical simulation and experimental validation on ammonia and hydrogen fueled micro tubular solid oxide fuel cell performance, International Journal of Hydrogen Energy, 47 (2022) 15865-15874.
    
11. Impact of lamination conditions on microtubular solid oxide fuel cells fabricated by tape casting coupled with isostatic pressing, Journal of Power Sources, 532 (2022) 231369.
    
12. Development of ceramic fiber reinforced glass ceramic sealants for microtubular solid oxide fuel cells, Ceramics International, 48 (2022) 15703-15710.
    
13. Investigation of external compression in scaling up of planar solid oxide fuel cells, International Journal of Hydrogen Energy, 47 (2022) 19752-19757.
    
14. Effects of pore former type on mechanical and electrochemical performance of anode support microtubes in solid oxide fuel cells, International Journal of Hydrogen Energy, 47 (2022) 11633-11643.
    
15. Tape casting coupled with isostatic pressing as an alternative fabrication method for microtubular solid oxide fuel cells, International Journal of Hydrogen Energy, 47 (2022) 9735-9743.
    
16. Fabrication of glass ceramic sealants with ceramic fiber filler for solid oxide fuel cells, Ceramics International, 48 (2022) 3779-3789.
    
17. Mesh patterned electrolyte supports for high‐performance solid oxide fuel cells, International Journal of Energy Research, (2022).
    
18. Development of high performance and low‐cost solid oxide fuel cell stacks: Numerical optimization of flow channel geometry, International Journal of Energy Research, 45 (2021) 20634-20650.
    
19. Improving the electrochemical performance of solid oxide fuel cells by surface patterning of the electrolyte, Journal of Power Sources, 512 (2021) 230489.
    
20. Engineering solid oxide fuel cell electrode microstructure by a micro-modeling tool based on estimation of TPB length, International Journal of Hydrogen Energy, 46 (2021) 13298-13317.
    
21. Effect of surface roughness of the metallic interconnects on the bonding strength in solid oxide fuel cells, International Journal of Hydrogen Energy, 45 (2020) 35118-35129.
    
22. Investigation of formability of metallic bipolar plates via stamping for light-weight PEM fuel cells, International Journal of Hydrogen Energy, 45 (2020) 35149-35161.
    
23. Comparison of electrolyte fabrication techniques on the performance of anode supported solid oxide fuel cells, International Journal of Hydrogen Energy, 45 (2020) 35162-35170.
    
24. Experimental optimization of the fabrication parameters for anode-supported micro-tubular solid oxide fuel cells, International Journal of Hydrogen Energy, 45 (2020) 23294-23309.
    
25. Design and fabrication of novel interconnectors for solid oxide fuel cells via rubber pad forming, International Journal of Energy Research, 44 (2020) 8716-8729.
    
26. Novel structured anode-supported solid oxide fuel cells with porous GDC interlayers, Ceramics International, 46 (2020) 11066-11074.
    
27. Influence of doctor blade gap on the properties of tape cast NiO/YSZ anode supports for solid oxide fuel cells, Ceramics International, 45 (2019) 3192-3198.
    
28. Performance evaluation of ejector with different secondary flow directions and geometric properties for solid oxide fuel cell applications, Journal of Power Sources 421 (2019) 76-90.
    
29. Effects of solid loading on joining and thermal cycling performance of glass-ceramic sealing pastes for solid oxide fuel cells, Ceramics International, 45 (2019) 12845-12850.
    
30. Glass fiber reinforced sealants for solid oxide fuel cells, International Journal of Hydrogen Energy 44 (2019) 18308-18318.
    
31. Transport phenomena of convergent and divergent serpentine flow fields for PEMFC, Energy, 161 (2018) 104-117.
    
32. The role of tape thickness on mechanical properties and performance of electrolyte supports in solid oxide fuel cells, Ceramics International 44 (2018) 17399-17406.
    
33. umerical investigation of convergent and divergent parallel flow fields for PEMFCs, Fuel Cells 18 (2018) 441-448.
    
34. Determination of formability characteristics of Crofer 22 APU sheets as interconnector for solid oxide fuel cells, International Journal of Hydrogen Energy 43 (2018) 14638-14647.
    
35. Influence of sintering support design on the properties of NiO-YSZ anode support micro-tubes, Ceramics International 44 (2018) 5587-5593.
    
36. Geometric optimization of an ejector for a 4kW SOFC system with anode off-gas recycle, International Journal of Hydrogen Energy 43 (2018) 9413-9422.
    
37. Purity investigation of hydrogen produced by hydrolysis of sodium borohydride via phosphoric acid process, Chemical Problems, 2 (2017) 136-145.
    
38. Determination of optimum ejector operating pressures for anodic recirculation in SOFC systems, International Journal of Hydrogen Energy 42 (2017) 20241-20251.
    
39. Design and fabrication of novel anode flow-field for commercial size solid oxide fuel cells, Journal of Power Sources 346 (2017) 49-55.
    
40. Effects of fabrication parameters on the performance of solid oxide electrolyzer cell, International Journal of Hydrogen Energy 41 (2016) 9723-9730.
41. Development of anodes for direct oxidation of methane fuel in solid oxide fuel cells, International Journal of Hydrogen Energy 41 (2016) 10021-10029.
42. Effects of operation temperature and reactant gas humidity level on performance of PEM fuel cells, Renewable and Sustainable Energy Reviews 59C (2016) 1298-1306.
43. Investigation of micro-tube solid oxide fuel cell fabrication using extrusion method, International Journal of Hydrogen Energy 41 (2016) 10037-10043.
44. A review on cell/stack designs for high performance solid oxide fuel cells, Renewable and Sustainable Energy Reviews 56C (2016) 1101-1121.
45. A review on micro-level modeling of solid oxide fuel cells, International Journal of Hydrogen Energy 41 (2016) 9968-9981.
46. Investigation of temperature distribution and performance of SOFC short stack with/without machined gas channels, International Journal of Hydrogen Energy 41 (2016) 10030-10036.
47. Mechanical and electrochemical behavior of novel electrolytes based on partially stabilized zirconia for solid oxide fuel cells, Ceramics International 41 (2015) 8785-8790.
48. Strength evaluation of glass-ceramic composites containing yttria stabilized zirconia, Ceramics International 41 (2015) 6985-6990.
49. The role of lamination conditions on electrochemical and mechanical performance of ceramic electrolytes for solid oxide fuel cells, Ceramics International 41 (2015) 2057-2068.
50. A performance prediction tool for solid oxide fuel cells after single redox cycle, Fuel Cells 15 (2015) 71-89.
51. Effects of ceramic based pastes on electrochemical performance of solid oxide fuel cells, Ceramics International 40 (2014) 8575-8583.     
52. Effects of anode fabrication parameters on the performance and redox behavior of solid oxide fuel cells, Journal of Power Sources 258 (2014) 108-116.
53. Measurement of the temperature distribution in a large solid oxide fuel cell short stack, International Journal of Hydrogen Energy 38 (2013) 10534-10541.  
54. Design and fabrication of stair-step type electrolyte structure for solid oxide fuel cells, International Journal of Energy Research 37 (2013) 631-637.
55. Electrochemical behaviour and sulfur tolerance of VxMo(1-x)Oy  as SOFC anode, Ceramics International 39 (2013) 7053-7061.
56. Development of high performance anode supported solid oxide fuel cell, International Journal of Energy Research 36 (2012) 1383-1387.
57. Novel electrolytes for solid oxide fuel cells with improved mechanical properties, International Journal of Hydrogen Energy 37 (2012) 13499-13509.
58. Novel structured electrolytes for solid oxide fuel cells, Journal of Power Sources 213 (2012) 47-54.
59. Effects of electrolyte pattern on mechanical and electrochemical properties of solid oxide fuel cells, Ceramics International 38 (2012) 5651-5659.
60. Novel structured gadolinium doped ceria based electrolytes for intermediate temperature solid oxide fuel cells, Journal of Power Sources 196 (2011) 9361-9364.
61. Anode-supported solid oxide fuel cells with ion conductor infiltration, International Journal of Energy Research, 35 (2011) 1048-1055.
62. A novel two-part interconnector for solid oxide fuel cells, International Journal of Energy Research 38 (2014) 1835-1842.
63. Development and testing of a highly efficient proton exchange membrane (PEM) electrolyzer stack, International Journal of Hydrogen Energy 36 (2011) 11480-11487.
64. Effect of binder burnout on the sealing performance of glass ceramics for solid oxide fuel cells, Journal of Power Sources 242 (2013) 775-783.
65. Effect of design parameters on enhancement of hydrogen charging in metal hydride reactors, International Journal of Hydrogen Energy 34 (2009) 2288-2294.
66. Effects of bolt torque and contact resistance on the performance of the polymer electrolyte membrane electrolyzers, Journal of Power Sources 281 (2015) 103-113.
67. Effects of mesh and interconnector design on solid oxide fuel cell performance, International Journal of Hydrogen Energy, International Journal of Hydrogen Energy 40 (2015) 7829-7834.
68. Effects of operating parameters on the performance of a high-pressure proton exchange membrane electrolyzer, International Journal of Energy Research 37 (2013) 457-467.
69. Eğilme dayanimi iyileştirilmiş anot destekli kati oksit yakit pili geliştirilmesi, Havacilik ve Uzay Teknolojileri Dergisi 7 (2014) 45-53.
70. Influential parameters and performance of a glass-ceramic sealant for solid oxide fuel cells, Ceramics International 41 (2015) 2744-2751.
71. Investigation of gas generation in regenerative fuel cells by low-energy X-rays, Journal of Power Sources 296 (2015) 133-141.
72. Measurement and estimation of species distribution in a direct methanol fuel cell, International Journal of Hydrogen Energy 35 (2010) 2151-2159.
73. Micro level two dimensional stress and thermal analysis anode/electrolyte interface of a solid oxide fuel cell, International Journal of Hydrogen Energy 40 (2015) 7895-7902.
74. Microstructural finite element modeling of redox behavior of Ni–YSZ based ceramic SOFC anodes, Ceramics International 42 (2016) 8915-8924.
75. Optimum processing parameters to improve sealing performance in solid oxide fuel cells, Ceramics International 41 (2015) 9834-9842.
76. Three dimensional stress analysis of solid oxide fuel cell anode micro structure, International Journal of Hydrogen Energy 39 (2014) 19119-19131.
77. Two-phase flow in a proton exchange membrane electrolyzer visualized in situ by simultaneous neutron radiography and optical imaging, International Journal of Hydrogen Energy 38 (2013) 5823-5835